FAQ

01

How to contact us?

Name:Dorothy Telephone:18642871678 E-mail:912727233@qq.com

02

What should be checked during coupling commissioning?

1.Motor starts normally 2.Hydraulic coupling closed 3.Observe whether there is oil leakage on the ground and 4.environment, and the oil must not leak. 5.The machine is running normally 6.Noise condition is normal

03

How to correctly install a fluid coupling?

1.Before installation, clean the working machine shaft and coupling shaft holes, and then apply lubricating grease. 2.Fasten the coupling to suitable lifting equipment and align it with the working machine axis. 3.Installation using hollow jacks 1)First tighten the screw on the working machine shaft. 2)Use spacers to adjust the length according to actual working conditions. 3)Fasten the jack, spacer and coupling with fastening nuts. 4)Run the jack for installation purposes

Get the latest price? We'll respond as soon as possible(within 12 hours)
This field is required
This field is required
Required and valid email address
This field is required
This field is required
For a better browsing experience, we recommend that you use Chrome, Firefox, Safari and Edge browsers.